ZyXEL Communications AMG1302-T10A User Manual Download Page 106

Page: 106 / 332

Chapter 8 Wireless LAN

AMG1302-T10A User’s Guide

106

8.2.6 MAC Filter

Use this screen to change your Device’s MAC filter settings. Click the

Edit

button in the

screen.

The screen appears as shown.

Figure 52

Network > Wireless LAN > AP: MAC Address Filter

The following table describes the labels in this screen.

8.3 The More AP Screen

This screen allows you to enable and configure multiple Basic Service Sets (BSSs) on the Device.

Table 34

Network > Wireless LAN > AP: MAC Address Filter

LABEL

DESCRIPTION

Enable MAC

Filter

Select the check box to enable MAC address filtering.

Filter Action

Define the filter action for the list of MAC addresses in the

MAC Address

table.

Select

Deny

to block access to the Device. MAC addresses not listed will be allowed to access

the Device

Select

Allow

to permit access to the Device. MAC addresses not listed will be denied access

to the Device.

Set

This is the index number of the MAC address.

MAC Address

Enter the MAC addresses of the wireless devices that are allowed or denied access to the

Device in these address fields. Enter the MAC addresses in a valid MAC address format, that

is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.

Back

Click this to return to the previous screen without saving.

Apply

Click this to save your changes.

Reset

Click this to restore your previously saved settings.

Summary of Contents for AMG1302-T10A













































































































































































































































































































































Search results

Summary of Contents for AMG1302-T10A

Reviews:

Related manuals for AMG1302-T10A

Brands by name

Popular brands

ZyXEL Communications AMG1302-T10A, User Manual

Search results

Summary of Contents for AMG1302-T10A

Reviews:

Related manuals for AMG1302-T10A

Brands by name

Popular brands