manualshive.com logo in svg

ZyXEL Communications AMG1202-T10A, User Manual, Page: 21 / 296

Share
Download
ZyXEL Communications AMG1202-T10A User Manual Download Page 21

AMG1202-T10A User’s Guide

21

C

HAPTER

    1

Introduction

1.1  Overview

The AMG1202-T10A is an ADSL2+ router. By integrating DSL and NAT, you are provided with ease 
of installation and high-speed, shared Internet access. The AMG1202-T10A is also a complete 
security solution with a robust firewall and content filtering.

Only use firmware for your ZyXEL Device’s specific model. Refer to the 
label on the bottom of your ZyXEL Device.

Note: All screens displayed in this user’s guide are from the 

AMG1202-T10A

 model.

See the product specifications for a full list of features.

1.2  Ways to Manage the ZyXEL Device

Use any of the following methods to manage the ZyXEL Device.

• Web Configurator. This is recommended for everyday management of the ZyXEL Device using a 

(supported) web browser.

• Command Line Interface. Line commands are mostly used for troubleshooting by service 

engineers.

• FTP for firmware upgrades and configuration backup/restore.
• TR-069. This is an auto-configuration server used to remotely configure your device.

1.3  Good Habits for Managing the ZyXEL Device

Do the following things regularly to make the ZyXEL Device more secure and to manage the ZyXEL 
Device more effectively.

• Change the password. Use a password that’s not easy to guess and that consists of different 

types of characters, such as numbers and letters.

• Write down the password and put it in a safe place.
• Back up the configuration (and make sure you know how to restore it). Restoring an earlier 

working configuration may be useful if the device becomes unstable or even crashes. If you 
forget your password, you will have to reset the ZyXEL Device to its factory default settings. If 
you backed up an earlier configuration file, you would not have to totally re-configure the ZyXEL 
Device. You could simply restore your last configuration.

Summary of Contents for AMG1202-T10A









































































































































































































































































































Reviews:

No comments