manualshive.com logo in svg

ZyXEL Communications AMG1202-T10A, User Manual, Page: 167 / 296

Share
Download
ZyXEL Communications AMG1202-T10A User Manual Download Page 167

AMG1202-T10A User’s Guide

167

C

HAPTER

    15

Dynamic DNS Setup

15.1  Overview 

Dynamic DNS allows you to update your current dynamic IP address with one or many dynamic 
DNS services so that anyone can contact you (in NetMeeting, CU-SeeMe, etc.). You can also access 
your FTP server or Web site on your own computer using a domain name (for instance 
myhost.dhs.org, where myhost is a name of your choice) that will never change instead of using an 
IP address that changes each time you reconnect. Your friends or relatives will always be able to 
call you even if they don't know your IP address.

First of all, you need to have registered a dynamic DNS account with www.dyndns.org. This is for 
people with a dynamic IP from their ISP or DHCP server that would still like to have a domain name. 
The Dynamic DNS service provider will give you a password or key. 

15.1.1  What You Can Do in the DDNS Screen

Use the 

Dynamic DNS

 screen (

Section 15.2 on page 168

) to enable DDNS and configure the DDNS 

settings on the ZyXEL Device.

15.1.2  What You Need To Know About DDNS

DYNDNS Wildcard

Enabling the wildcard feature for your host causes *.yourhost.dyndns.org to be aliased to the same 
IP address as yourhost.dyndns.org. This feature is useful if you want to be able to use, for example, 
www.yourhost.dyndns.org and still reach your hostname.

If you have a private WAN IP address, then you cannot use Dynamic DNS.

Summary of Contents for AMG1202-T10A









































































































































































































































































































Reviews:

No comments