ZyXEL Communications AMG1202-T10A User Manual Download Page 144

Page: 144 / 296

Chapter 11 Filters

AMG1202-T10A User’s Guide

144

11.2 The URL Filter Screen

Use this screen to block websites by URL. Click

Security

Filter

URL Filter

. The screen appears

as shown.

Figure 74

Security > Filter > URL Filter

The following table describes the labels in this screen.

Table 50

Access Management > Filter (URL)

LABEL

DESCRIPTION

URL Filter Editing

Active

Use this field to enable or disable the URL filter.

URL Index

Select the index number of the filter.

URL

Enter the URL for the ZyXEL Device to block.

URL Filter Listing

Index

This is the index number of the filter rule.

URL

This is the URL you have configured the ZyXEL Device to block.

Apply

Click this to save your changes.

Delete

Click this to remove the filter rule.

Cancel

Click this to restore your previously saved settings.

Summary of Contents for AMG1202-T10A









































































































































































































































































































Search results

Summary of Contents for AMG1202-T10A

Reviews:

ZyXEL Communications AMG1202-T10A, User Manual, Page: 144 / 296

Search results

Summary of Contents for AMG1202-T10A

Reviews: