ZyXEL Communications AMG1202-T series, User Manual, Page: 35 / 320

Chapter 3 Internet / Wireless Setup Wizard
AMG1302/AMG1202-TSeries User’s Guide
35
• If the Internet connection fails, check to see if your account is activated.
After you configure the Internet access information, use the following screen to set up
your wireless LAN.
5
Check the Wireless Service box to enable wireless connection on the ZyXEL device.
6
Configure your wireless settings in this screen. Click Next .
Figure 13 Wireless Setup
The following table describes the labels in this screen.
Table 7 Wireless Setup
LABEL DESCRIPTION
Wireless
Service Click this to enable or disable wireless service on the ZyXEL device.
Wireless
Network
Name(SSID) Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the
wireless LAN.
If you change this field on the AMG1302/AMG1202-TSeries, make sure all
wireless stations use the same SSID in order to access the network.
Channel
Selection The range of radio frequencies used by IEEE 802.11b/g wireless devices is
called a channel. Select a channel ID that is not already in use by a
neighboring device.
Security Displays the security setting. To mofidy, see Section 7.2 on page 92 .
Pre-Shared
Key Enter a set of characters (8 to 63 characters or 64 hexadecimal digits [a-f,
A-F, and 0-9]) for the shared security key.
Back Click this to return to the previous screen without saving.
Next Click this to continue to the next wizard screen.
Exit Click this to close the wizard screen without saving.