ZyXEL Communications AMG1202-T series User Manual Download Page 29

Page: 29 / 320

AMG1302/AMG1202-TSeries User’s Guide

H A P T E R

Internet / Wireless Setup Wizard

3.1 Overview

Use the wizard setup

screens to configure your system for Internet access with the

information given to you by your ISP.

Note: See the advanced menu chapters for background information on these fields.

3.2 Internet / Wireless Wizard Setup

After you enter the password to access the web configurator, click the Wizard icon (

) in

the top right corner of the web configurator

to go to the Wizard.

Click

INTERNET/WIRELESS SETUP

to configure the system for Internet access and

wireless connection.

Summary of Contents for AMG1202-T series

































































































































































































































































































































Search results

Summary of Contents for AMG1202-T series

Reviews:

ZyXEL Communications AMG1202-T series, User Manual, Page: 29 / 320

Search results

Summary of Contents for AMG1202-T series

Reviews: