manualshive.com logo in svg

ZyXEL Communications AMG1202-T series, User Manual, Page: 106 / 320

Share
Download
ZyXEL Communications AMG1202-T series User Manual Download Page 106

Chapter 7 Wireless LAN

AMG1302/AMG1202-TSeries User’s Guide

106

7.9  The Advanced Screen

Use this screen to configure advanced wireless settings. Click 

Network Setting

 > 

Wireless

 > 

Advanced

, the screen appears as shown.

See 

Section 7.10.2 on page 109

 for detailed definitions of the terms listed in this screen.

Figure 38   

Network Setting > Wireless> Advanced

The following table describes the labels in this screen. 

Time (24-Hour 
Format)

Specify a time frame during which the schedule would apply.

For example, if you set the time range from 12:00 to 23:00, the wireless LAN will be 
turned on only during this time period.

Apply

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.

Table 26   

Network Setting > Wireless > Scheduling

LABEL

DESCRIPTION

Table 27   

Network Setting > Wireless> Advanced

LABEL

DESCRIPTION

Fragmentation 
Threshold

This is the maximum data fragment size that can be sent. Enter a value between 256 and 
2346. 

Output Power

Set the output power of the AMG1302/AMG1202-TSeries. If there is a high density of APs 
in an area, decrease the output power to reduce interference with other APs. Select one 
of the following: 

100%

,

 75%, 50%

 or

 25%

. 

Preamble

Select a preamble type from the drop-down list menu. Choices are 

Long

 or 

Short

. See 

the 

Appendix D on page 285

 for more information.

Summary of Contents for AMG1202-T series

































































































































































































































































































































Reviews:

No comments