ZyXEL Communications AG-320, User Manual

Page: 56 / 114

ZyXEL AG-320 User’s Guide
56 Chapter 4 Wireless Station Mode Configuration
4.4.1 Adding a New Profile
Follow the steps below to add a new profile.
• Click Add in the Profile screen. An Add New Profile screen displays as shown next.
Click Next to continue.
Figure 33 Station Mode: Profile: Add a New Profile
The following table describes the labels in this screen.
Security This field shows whether data encryption is activated ( WEP , WPA , WPA-PSK ,
WPA2 , WPA2-PSK ) or inactive ( Disable ).
Transfer Rate This field displays the transmission speed of the selected profile in megabits per
second (Mbps).
Table 13 Station Mode: Profile (continued)
LABEL DESCRIPTION
Table 14 Station Mode: Profile: Add a New Profile
LABEL DESCRIPTION
Add New Profile
Profile Name Enter a descriptive name in this field.
SSID Select an available wireless device in the Scan Info table and click Select , or enter
the SSID of the wireless device to which you want to associate in this field
manually. Otherwise, enter Any to have the AG-320 associate to any AP or roam
between any infrastructure wireless networks.
Network Type Select Infrastructure to associate to an AP. Select Ad-Hoc to associate to a peer
computer.
Next Click Next to go to the next screen.
Exit Click Exit to go back to the previous screen without saving.
Scan Info This table displays the information of the available wireless networks within the
transmission range.