ZyXEL Communications ADSL/ADSL2/ADSL2+ Router 660R-6xC Series, User Manual

Page: 217 / 282

Prestige 660R-6xC Series User’s Guide
Chapter 26 System Maintenance 216
Figure 150 Menu 24.9.1 System Maintenance: Budget Management
The total budget is the time limit on the accumulated time for outgoing calls to a remote node.
When this limit is reached, the call will be dropped and further outgoing calls to that remote
node will be blocked. After each period, the total budget is reset. The default for the total
budget is 0 minutes and the period is 0 hours, meaning no budget control. You can reset the
accumulated connection time in this menu by entering the index of a remote node. Enter 0 to
update the screen. The budget and the reset period can be configured in menu 11.1 for the
remote node when PPPoE encapsulation is selected.
26.3 Time and Date Setting
The Prestige keeps track of the time and date. There is also a software mechanism to set the
time manually or get the current time and date from an external server when you turn on your
Prestige. Menu 24.10 allows you to update the time and date settings of your Prestige.
The real
time is then displayed in the Prestige error logs.
Select menu 24 in the main menu to open Menu 24 System Maintenance , as shown next.
Menu 24.9.1 - System Maintenance - Budget Management
Remote Node Connection Time/Total Budget Elapsed Time/Total Period
1.MyIsp No Budget No Budget
2.-------- --- ---
3.-------- --- ---
4.-------- --- ---
5.-------- --- ---
6.-------- --- ---
7.-------- --- ---
8.-------- --- ---
Reset Node (0 to update screen):
Table 66 Menu 24.9.1 System Maintenance : Budget Management
FIELD DESCRIPTION
Remote Node Enter the index number of the remote node you want to reset (just one in
this case)
Connection Time/Total
Budget
This is the total connection time that has gone by (within the allocated
budget that you set in menu 11.1.
Elapsed Time/Total Period The period is the time cycle in hours that the allocation budget is reset
(see menu 11.1.) The elapsed time is the time used up within this period.
Enter “0” to update the screen or press [ESC] to return to the previous screen.