ZyXEL Communications ADSL 2+ Security Gateway User Manual Download Page 610

Page: 610 / 686

Chapter 45 Troubleshooting

ZyWALL 2 Plus User’s Guide

610

interfering with the wireless network (for example, microwaves, other wireless
networks, and so on).

Reboot the ZyWALL.

If the problem continues, contact the network administrator or vendor, or try one of the
advanced suggestions.

Advanced Suggestions

• Check the settings for bandwidth management. If it is disabled, you might consider

activating it. If it is enabled, you might consider changing the allocations.

45.4 Wireless Router/AP Troubleshooting

I cannot access the ZyWALL or ping any computer from the WLAN.

Make sure the wireless LAN is enabled on the ZyWALL

Make sure the wireless adapter on the wireless station is working properly.

Make sure the wireless adapter (installed on your computer) is IEEE 802.11 compatible
and supports the same wireless standard as the ZyWALL.

Make sure your computer (with a wireless adapter installed) is within the transmission
range of the ZyWALL.

Check that both the ZyWALL and your wireless station are using the same wireless and
wireless security settings.

Make sure traffic between the WLAN and the LAN is not blocked by the firewall on the
ZyWALL.

Make sure you allow the ZyWALL to be remotely accessed through the WLAN
interface. Check your remote management settings.

45.5 UPnP

When using UPnP and the ZyWALL reboots, my computer cannot detect
UPnP and refresh

My Network Places > Local Network

Disconnect the Ethernet cable from the ZyWALL’s LAN port or from your computer.

Re-connect the Ethernet cable.

The

Local Area Connection

icon for UPnP disappears in the screen.

Summary of Contents for ADSL 2+ Security Gateway















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ADSL 2+ Security Gateway

Reviews:

Related manuals for ADSL 2+ Security Gateway

Brands by name

Popular brands

ZyXEL Communications ADSL 2+ Security Gateway, User Manual

Search results

Summary of Contents for ADSL 2+ Security Gateway

Reviews:

Related manuals for ADSL 2+ Security Gateway

Brands by name

Popular brands