manualshive.com logo in svg

ZyXEL Communications ADSL 2+ Security Gateway, User Manual, Page: 452 / 686

Share
Download
ZyXEL Communications ADSL 2+ Security Gateway User Manual Download Page 452

Chapter 26 Maintenance

ZyWALL 2 Plus User’s Guide

452

26.5  Pre-defined NTP Time Server Pools

When you turn on the ZyWALL for the first time, the date and time start at 2000-01-01 
00:00:00. The ZyWALL then attempts to synchronize with an NTP time server from one of 
the 0.pool.ntp.org, 1.pool.ntp.org or 2.pool.ntp.org NTP time server pools. These are virtual 
clusters of time servers that use a round robin method to provide different NTP servers to 
clients.  
The ZyWALL continues to use the NTP time server pools if you do not specify a time server 
or it cannot synchronize with the time server you specified. 

"

The ZyWALL can use the NTP time server pools regardless of the time 
protocol you select.

When the ZyWALL uses the NTP time server pools, it randomly selects one pool and tries to 
synchronize with a server in it. If the synchronization fails, then the ZyWALL goes through 
the rest of the list in order from the first one tried until either it is successful or all the pre-
defined NTP time server pools have been tried.

26.5.1  Resetting the Time

The ZyWALL resets time and date settings from the time server under the following 
circumstances.

• When the ZyWALL starts up.
• When you click 

Apply

 or 

Synchronize Now

 in the 

Time Setting

 screen.

• 24-hour intervals after starting up.

26.5.2  Time Server Synchronization

Click the 

Synchronize Now

 button to get the time and date from the predefined time server or 

the time server you specified in the 

Time Server Address

 field. 

When the 

System Time and Date Synchronization in Process 

screen appears, wait up to one 

minute.

Figure 282   

Synchronization in Process

Click the 

Return

 button to go back to the 

Time and Date

 screen after the time and date is 

updated successfully.

Summary of Contents for ADSL 2+ Security Gateway















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments