manualshive.com logo in svg

ZyXEL Communications ADSL 2+ Security Gateway, User Manual, Page: 353 / 686

Share
Download
ZyXEL Communications ADSL 2+ Security Gateway User Manual Download Page 353

 Chapter 19 Bandwidth Management

ZyWALL 2 Plus User’s Guide

353

19.7  Scheduler

The scheduler divides up an interface’s bandwidth among the bandwidth classes. The 
ZyWALL has two types of scheduler: fairness-based and priority-based. 

19.7.1  Priority-based Scheduler

With the priority-based scheduler, the ZyWALL forwards traffic from bandwidth classes 
according to the priorities that you assign to the bandwidth classes. The larger a bandwidth 
class’s priority number is, the higher the priority. Assign real-time applications (like those 
using audio or video) a higher priority number to provide smoother operation.

19.7.2  Fairness-based Scheduler

The ZyWALL divides bandwidth equally among bandwidth classes when using the fairness-
based scheduler; thus preventing one bandwidth class from using all of the interface’s 
bandwidth. 

19.7.3  Maximize Bandwidth Usage

The maximize bandwidth usage option allows the ZyWALL to divide up any available 
bandwidth on the interface (including unallocated bandwidth and any allocated bandwidth that 
a class is not using) among the bandwidth classes that require more bandwidth. 
When you enable maximize bandwidth usage, the ZyWALL first makes sure that each 
bandwidth class gets up to its bandwidth allotment. Next, the ZyWALL divides up an 
interface’s available bandwidth (bandwidth that is unbudgeted or unused by the classes) 
depending on how many bandwidth classes require more bandwidth and on their priority 
levels. When only one class requires more bandwidth, the ZyWALL gives extra bandwidth to 
that class. 
When multiple classes require more bandwidth, the ZyWALL gives the highest priority 
classes the available bandwidth first (as much as they require, if there is enough available 
bandwidth), and then to lower priority classes if there is still bandwidth available. The 
ZyWALL distributes the available bandwidth equally among classes with the same priority 
level. 

19.7.4  Reserving Bandwidth for Non-Bandwidth Class Traffic

Do the following three steps to configure the ZyWALL to allow bandwidth for traffic that is 
not defined in a bandwidth filter.

1

Leave some of the interface’s bandwidth unbudgeted.

E-mail

64 Kbps

64 Kbps

Video

64 Kbps

64 Kbps

Table 102   

Application and Subnet-based Bandwidth Management Example

TRAFFIC TYPE

FROM SUBNET A

FROM SUBNET B

Summary of Contents for ADSL 2+ Security Gateway















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments