ZyXEL Communications ADSL 2+ Security Gateway User Manual Download Page 256

Page: 256 / 686

Chapter 14 IPSec VPN

ZyWALL 2 Plus User’s Guide

256

Figure 172

SECURITY > VPN > VPN Rules (IKE)

The following table describes the labels in this screen.

Table 64

SECURITY > VPN > VPN Rules (IKE)

LABEL

DESCRIPTION

VPN Rules

These VPN rules define the settings for creating VPN tunnels for secure

connection to other computers or networks.

Click this icon to add a VPN gateway policy (or IPSec rule).

Gateway Policies

The first row of each VPN rule represents the gateway policy.
The gateway policy identifies the IPSec routers at either end of a VPN tunnel

(

My ZyWALL

and

Remote Gateway

) and specifies the authentication,

encryption and other settings needed to negotiate a phase 1 IKE SA (click the

edit icon to display the other settings).

My ZyWALL

This represents your ZyWALL.
The WAN IP address, domain name or dynamic domain name of your

ZyWALL displays in router mode.
The ZyWALL’s IP address displays in bridge mode.

Remote

Gateway

This represents the remote secure gateway.
The IP address, domain name or dynamic domain name of the remote IPSec

router displays if you specify it, otherwise

Dynamic

displays.

Click this icon to add a VPN network policy.

Network Policies

The subsequent rows in a VPN rule are network policies. A network policy

identifies the devices behind the IPSec routers at either end of a VPN tunnel

and specifies the authentication, encryption and other settings needed to

negotiate a phase 2 IPSec SA.

Local

Network

This is the network behind the ZyWALL. A network policy specifies which

devices (behind the IPSec routers) can use the VPN tunnel.

Remote

Network

This is the remote network behind the remote IPsec router.

Click this icon to display a screen in which you can associate a network policy

to a gateway policy or move it to the recycle bin.

Summary of Contents for ADSL 2+ Security Gateway















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ADSL 2+ Security Gateway

Reviews:

ZyXEL Communications ADSL 2+ Security Gateway, User Manual, Page: 256 / 686

Search results

Summary of Contents for ADSL 2+ Security Gateway

Reviews: