ZyXEL Communications AAM1212, User Manual

Page: 253 / 288

AAM1212 User’s Guide
252 Chapter 30 Statistics Commands
30.4 Statistics ADSL Commands
Use these commands to display ADSL port statistics.
30.4.1 Statistics ADSL Show Command
Syntax:
statistics adsl show [portlist]
where
This command displays ADSL port connection statistics including the status (V for enabled, -
for disabled), ADSL operational mode, upstream and downstream maximum rates, up time
and the number of errored seconds.
The following example displays connection statistics for ADSL port 3.
Figure 160 ADSL Show Command Example
30.4.2 Statistics ADSL Linedata Command
Syntax:
statistics adsl linedata <portlist>
where
This command shows the line bit allocation of an ADSL port.
[portlist]
= You can specify a single ADSL port <1>, all ADSL ports <*> or
a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
ras> statistics adsl show 3
port status mode up/downstream up time error second
---- ------ -------- ------------- -------------- ------------
3 - - -/ - - -
<portlist>
= You can specify a single ADSL port <1>, all ADSL ports <*> or
a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.