ZyXEL Communications AAM1212, User Manual

Page: 185 / 288

AAM1212 User’s Guide
184 Chapter 26 Sys Commands
This command shows general system settings, such as the RAS code, firmware version,
system uptime and bootbase version.
An example is shown next.
Figure 90 Info Show Command Example
26.2.2 Password Command
Syntax:
ras> sys passwd
This command allows you to change the system’s password.
An example is shown next.
Figure 91 Passwd Command Example
26.2.3 SNMP Overview
SNMP (Simple Network Management Protocol) is a protocol used for exchanging
management information between network devices. The AAM supports SNMP versions one
and two (SNMPv1 and SNMPv2) agent functionality, which allows a manager station to
manage and monitor it through the network. See the web configurator chapter on SNMP for
background information on SNMP and the AAM’s supported MIBs and SNMP traps.
ras> sys info show
Hostname:
Location:
Contact:
Model: AAM1212-51
ZyNOS version: V350(ABA.0)b2 | 04/18/2005
MAC address: 00:13:49:24:52:34
ZyNOS size: 2203086
System up time: 0(days) : 0:12:13
Bootbase version: V1.03(AAM1212-51) | 02/18/2005
ZyNOS build date: Apr 27 2005 20:30:15
DSP f/w version: 6.02.0005
Hardware version:
Serial number:
ras> sys passwd
type old password:
type new password (max: 31 chars):
retype new password:
password changed ok
ras>