ZyXEL Communications AAM1212-51, User Manual

Page: 251 / 435

AAM1212-51/53 Series User’s Guide
Chapter 41 Commands 251
C
H A P T E R
41
Commands
This chapter introduces the command line interface and lists the available commands.
41.1 Command Line Interface Overview
Note: See the previous chapters for background information on features configurable
by the web configurator. The web configurator is the preferred configuration
tool.
You can use text command lines for software configuration. The rules of the commands are
listed next.
1 The command keywords are in
courier new font
.
2
Commands can be abbreviated to the smallest unique string that differentiates the
command. For example, the “
system date
” command could be abbreviated to “
sy d
”.
3
The optional fields in a command are enclosed in square brackets []. For instance,
config [save]
means that the
save
field is optional.
4
“Command” refers to a command used in the command line interface (CI command).
5 The | symbol means “or”.
Note: Using commands not documented in the User’s Guide can damage the unit
and possibly render it unusable.
41.2 Command Privilege Levels
There is a high, middle or low privilege level for each command.
High privilege commands are only available to administrators with high privilege access. High
privilege commands include things like creating administrator accounts, restarting the system
and resetting the factory defaults. Administrators with high privilege access can use all
commands including the lower privilege commands.
Administrators with middle privilege access can use middle or low privilege commands.
Administrators with the low privilege level are restricted to using only low privilege
commands. Low privilege commands are read only.