ZyXEL Communications 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx User Manual Download Page 354

Page: 354 / 402

Appendix D Setting up Your Computer’s IP Address

P-660HWP-Dx User’s Guide

• If you have a dynamic IP address click

Automatically obtain IP address settings

with

and select

dhcp

from the drop down list.

• If you have a static IP address click

Statically set IP Addresses

and fill in the

Address

Subnet mask

, and

Default Gateway Address

fields.

Click

to save the changes and close the

Ethernet Device General

screen.

If you know your DNS server IP address(es), click the

DNS

tab in the

Network

Configuration

screen. Enter the DNS server information in the fields provided.

Figure 205

Red Hat 9.0: KDE: Network Configuration: DNS

Click the

Devices

tab.

Click the

Activate

button to apply the changes. The following screen displays. Click

Yes

to save the changes in all screens.

Figure 206

Red Hat 9.0: KDE: Network Configuration: Activate

After the network card restart process is complete, make sure the

Status

Active

in the

Network Configuration

screen.

Using Configuration Files

Follow the steps below to edit the network configuration files and set your computer IP
address.

Assuming that you have only one network card on the computer, locate the

ifconfig-

eth0

configuration file (where

eth0

is the name of the Ethernet card). Open the

configuration file with any plain text editor.
• If you have a dynamic IP address, enter

dhcp

in the

BOOTPROTO=

field. The following

figure shows an example.

Summary of Contents for 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx



















































































































































































































































































































































































































Search results

Summary of Contents for 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx

Reviews:

Related manuals for 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx

Brands by name

Popular brands

ZyXEL Communications 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx, User Manual

Search results

Summary of Contents for 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx

Reviews:

Related manuals for 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx

Brands by name

Popular brands