Chapter 5 Monitor
NWA1000 Series User’s Guide
47
Click
Monitor
>
Logs
.
Figure 15
Logs
The following table describes the labels in this screen.
5.4 Statistics
Use this screen to view read-only information, including 802.11 Mode, Channel ID, Retry Count and
FCS Error Count. Also provided is the "poll interval". The
Poll Interval
field is configurable and is
used for refreshing the screen.
Table 6
Logs
LABEL
DESCRIPTION
Display
Select a category of logs to view. Select
All Log
to view logs from all of the log
categories that you selected in the
Configuration
>
Log Settings
screen.
E-Mail Log Now
Click
E-Mail Log Now
to send the log screen to the e-mail address specified in the Log
Settings page (make sure that you have first filled in the E-mail Log Settings fields in
Configuration
>
Log Settings
).
Refresh
Click
Refresh
to renew the log screen.
Clear Log
Click
Clear Log
to delete all the logs.
#
This field is a sequential value and is not associated with a specific entry.
Time
This field displays the time the log was recorded.
Message
This field states the reason for the log.
Source
This field lists the source IP address and the port number of the incoming packet.
