30
www.Zykronix.com
7.5.3.1 Sensor Door Status Control
Door Sensors control the door opening status and send alarm call to preconfigured Day / Night destination if the door
opening time (‘Door Opened Timeout’ see Figure 7-15) expires and door does not return to its IDLE mode.
Note:
IP Door phone supports following Sensor types: Loop Control - Dry Contacts: Open / Close type
The used sensor shall provide the ‘Normally Open’ status in ZIP10 IDLE mode and ‘Normally Close’ status in Door
Opened mode.
The ‘Normally Open’ sensor type means that sensor provides the loop disconnection status via its pins in default
mode.
Figure 7-18 Normally Open Sensor
The ‘Normally Close’ sensor type means that sensor provides the short-connection status via its pins in default mode.
Figure 7-19 Normally Close Sensor
