29 Alexander Yannai Street, Petach Tikva, 49277, Israel
Tel: 972-3-9300318 Fax: 972-3-9047423 Email: [email protected]
www.vocally.co.il
G.G. ELECTRONICS
4
D.
When asked, say the name to be trained. You should speak clearly and as normal
as possible. When prompted, repeat the name, and if the training went well,Vocally
will ask you for the corresponding phone number. If the training failed, you will either
hear a sound , which means a general error happened during training, or you will
here the specific problem Vocally encountered during the training of the name.
E.
When prompted, enter the number using your phone’s keypad. You can program up
to 35 digits. You can program pauses (3 seconds each) within the phone number (to
be used by PBX systems or calling cards) by programming two consecutive stars (*).
Press the pound key (#) when you are done programming the number. Vocally will
read back the phone number you have entered and will then store the name and
number.
F.
Vocally automatically starts another name training cycle. If you fo not wish to
continue the training, you can simply hang-up or press the ‘#’ key to get back to the
main menu.
Training Vocally with commands (digits):
A.
Choose a quiet moment, where no TV sounds or other backgraound noises are
present. Training the unit in a noisy environment wil result in poor recognition rates
later on.
B.
Pick up the handset. If you have already trained Vocally with names, you will hear
the prompt “
Name to dial please
”. Press the # key following this prompt. If you did
not train it with names yet, you will hear the main menu. Press ‘5’ to train the
commands.
C.
Vocally will now ask you to say the ten digits. You will only need to say each digit
once and Vocally will move on to the next digit.
D.
Once the ten digits have been trained, Vocally will ask you to train the dialining
command. This can be any word you wish but ‘Dial’ is always a good choice.
Your third Step – Voice dialing
This is it. Vocally is now ready to listen to your voice and dial. Please follow these easy steps
to dial:
A.
Pick up the handset. If you have already trained Vocally with names, it will prompt
you for “
Name to dial please
”. If you have trained it only with digits, it will prompt you
“
Please say the number to dial, digit-by-digit
”. At the prompt, say the name you wish
to call or the first digit of the number you wish to voice dial.
B.
If you said a name, Vocally will play back the recognized name and will dial the
corresponding number. If Vocally did not recognize the name, it will say “
I am sorry,
but I do not recognize this name
” and you will be asked to try again. If Vocally still
does not recognize the name after 2 or 3 attempts, please turn to our
Troubleshooting Guide at the end of this manual.
