Network Speaker User Guide | ZYCOO Co., Ltd.
10
Advanced Settings
Volume Control
The network speaker’s volume level can be adjusted from its web management interface, on the Settings
->
Volume Control page.
⚫
Speaker Volume: The default speaker volume is 7, adjustable range is 0 ~ 9.
( The below setting parameters are only available for version 1.1 or above of SC15 & SW15. )
⚫
MIC AGC:
When this setting is enabled, the system will automatically adjust the microphone
volume according to the environment. User able to adjust the microphone volume manually when this
setting is disabled.
⚫
Microphone Volume: The default microphone volume is 7, adjustable range is 0 ~ 9.
⚫
AGC Min Volume: This setting represents the minimum value of the automatic gain control.
⚫
AGC Max Volume: This setting represents the maximum value of the automatic gain control.
(Note: It is recommended the volume level setting not exceed 7 under POE power supply mode,
otherwise it may cause the device to restart).
