3.6 Final Assembly
最后组装
After connecting all wires, please put bottom cover back by screwing screws.
连接所有电线后,
请拧紧螺丝将盖板装回原处。
4.OPERATION
操作
4.1 Power ON/OFF
电源开
/
关
Once the unit has been properly installed and the batteries are connected well, simply press
On/Off switch(located on the button of the case) to turn on the unit.
正确安装本机并正确连接电
池后,依次按下盖板上电池和机器
On /Off
开关(位于机箱按钮上)即可打开本机
.
The operation and display panel, shown in below chart, is on the front panel of the inverter. It
includes three indicators, four function keys and a LCD display, indicating the operating status
and input/output power information.
下图所示的操作和显示面板位于变频器的前面板上。 它包括
三个指示灯,四个功能键和一个
LCD
显示屏,用于指示操作状态和输入
/
输出功率信息。
4.2 Operation and Display Panel
操作和显示面板
1. AC Input information
交流输入信息
2. Operation information
操作信息
3. AC Output information
交流输出信息
4. AC/INV indicator
交流
/INV
指示灯
5. Charging indicator
充电指示灯
6. Fault indicator
故障指示灯
7. About button About
按钮
8. History button
历史按钮
9. Setting button
设置按钮
10. Diagram button
图像按钮
11. Battery information
电池信息
12. PV input information PV
输入信息
13. Load information
负载信息