background image

                                                 
 

                                                                                                  www.zuum.life                                                                                    ZM102419 

                              8805 Jones Rd. Ste. C104, Houston, X 77065 * 1-888-861-7351 * www.zuummedia.com    

              ZM 032014 

 

 
 
 

HE1LBIR232-EP-2.0-100M

 

 

HDMI Cat5/6 Extender for UHD displays up to 100 meters (328’) at 4Kx2K@60Hz UHD HDR 4:4:4

 

 

Extend high-resolution HDMI up to 100 meters (338’) with this HDMI extender over single Cat6a/Cat7 extender. Cat5 cable will give you 
shorter distance. This extender uses HDBaseT technology to extend uncompressed high-definition video up to 4Kx2K@60hz UHD HDR 
4:4:4. This extender also supports PoH. Power over cable and can be power from ether transmitter or receiver side. 

Features: 

>

  Extends HDMI, RS232 and IR signal over one CAT(X) cable, Cat6a/7 preferred (only one power supply needed)

 

 

>

  HDBaseT 2.0, HDMI 2.0, HDCP 2.2/1.4 & DVI Compliant 

 

1080p@60 up to (328’), 4Kx2K@60Hz 4:4:4 up to 328’ (Cat6a/7),18Gbps

 

Audio supports up to LPCM 7.1 @ 192KHz, Dolby TrueHD, DTS-HD MA, DTS:X, Atmos

 

Bi-directional IR, IR carrier support 30-60khz

 

 

Bi-Directional RS232 interface – commands and data can flow in both directions via RS232, allowing status requests and control of the  

      destination unit.

 

 

Bi-directional Supports CEC, EDID pass through 

 
 

Panel View: 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 
 
 
 
 
 

Summary of Contents for HE1LBIR232-EP-2.0-100M

Page 1: ... UHD HDR 4 4 4 This extender also supports PoH Power over cable and can be power from ether transmitter or receiver side Features Extends HDMI RS232 and IR signal over one CAT X cable Cat6a 7 preferred only one power supply needed HDBaseT 2 0 HDMI 2 0 HDCP 2 2 1 4 DVI Compliant 1080p 60 up to 328 4Kx2K 60Hz 4 4 4 up to 328 Cat6a 7 18Gbps Audio supports up to LPCM 7 1 192KHz Dolby TrueHD DTS HD MA ...

Page 2: ...revent video and audio loss due to EMI and other interference from switched lighting and ceiling fans HDCP 2 2 mode if any one monitor fails then all monitors will fail All devices must support HDCP 2 2 mode RJ45 Connection Do not connect HDBaseT RJ45 port to Ethernet signal or network devices to this port to avoid damage LED Status Firmware Update Switch Function 1 Reserved 2 FW1 updated 3 FW2 up...

Page 3: ...nto the HDMI Transmitter Extender IR RX input Then on the HDMI Receiver Extender by TV you plug the IR blaster included to the IR TX port This set up allows IR coming out of your 3rd party system to go into the HDMI Transmitter located at source equipment and send IR back up to TV so IR can control it as well from the 3rd party IR remote controller You can use the additional included cable to adap...

Page 4: ...2 0 100M RX HDMI Video Support Up to 1080p 60Hz 48bits 3D 4Kx2K 60Hz YCbCr 4 4 4 18Gbps HDMI Distance 1080p 60 up to 328 100m 4Kx2K 60Hz 4 4 4 up to 328 100m Cat6a 7 HDMI Connector Type A HDMI Audio Support Up to LPCM 7 1 192KHz Dolby TrueHD DTS HD MA HDBaseT Connector RJ45 x 1 RS 232 Connector DB9 Female DB9 Male RS 232 Baud Rate Up to 115200 bps Full Duplex IR Connector 3 5mm Phone Jack x 2 IR C...

Reviews: