13
Z886 PERMA-TRENCH
INSTALLATION INSTRUCTIONS
Z886 Catch Basins
FULL CHANNEL INSTALL WITH HEAVY-DUTY FRAME
1
To make connection to a basin, invert the basin and
channel and trace the outline of the channel onto the
basin. This should be done for all sizes of basins.
2
Cutting the hole in the basin can be easily accomplished
with the use of a hand saw or power reciprocating saw.
Cut out the material inside of the traced area.
4
Slide the male end of the channel into the inlet adapter
attaching them together with the supplied hardware and
silicone caulk or construction adhesive.
3
After the channel outline is removed from the catch
basin, cut the inlet adapter to just under the top of the
mechanical joint. Secure the inlet adapter to the basin
using the hardware provided. Be sure to use silicone caulk
or construction adhesive to seal the adapter to the basin.
Scrap
Scrap
