Zupapa Fitness Trampoline, User Manual

Page: 11 / 21

Before Assembling
Assembly Steps
Please read the assembly instructions before starting your work. A quick approach to the online version
(https://www.zupapa.us/pages/assembly-instructions) is to scan the following QR code.
(a) Pick up two Base Bracket (#A), align the hole with each other.
(b) Connect a 6-mm Washer (#F) with an M6 x 35 Socket Head Bolt (#E) and insert them into the aligned hole.
(c) Screw up another washer (#F) and the M6 Socket Head Nut (#G) after inserting them to the end of the part #F with the Spanner
(#H) and the 4mm Allen Key (#I).
(d) Repeat until you finish all six Base Bracket.
Please understand there is always a risk of injuries when using tools or doing technical work. The owner (or installer) should follow
the guidelines below for the assembly and should take responsibility for any improper operations.
You just need to assemble the base bracket and the trampoline mat (Step 1 & Step 2) for the model without the handlebar. You
need to move on with the handlebar assembly (Step 3) if you have another model.
• We recommend at least two adults for the assembly.
• Ensure all parts are dry before the assembly.
• Check and confirm you have all labeled parts according to the chapter Parts List . If you need any replacement(s), please feel free
to reach out to Zupapa® Customer Happiness Executives (official@zupapa.us) with the ORDER NUMBER, PART NUMBER,
REQUIRED QUANTITY for each part, and photos or video clips (if applicable).
10
05
ASSEMBLY
There are four steps listed as (a), (b), (c), and (d) for the frame base assembly.
STEP 1 – FRAME ASSEMBLY