Zumtobel LUXMATE CIRIA, Instructions For Start-Up And Use

Page: 61 / 142

Configuring the LM-CIRIA control unit
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en 61
593 Group icons (manual)
Group icons can be created for the entry level and displayed in any order. This section describes how
to create icons manually. Section
5.9.5 Group and building service icons (automatic) describes how to
create group icons automatically.
5931 Adding group icons
Path: SERVICE MENU / INTERNAL / GROUPS / ADD
Figure 104: ADD selection level
– Start point: ADD selection level
1. Select GROUP .
= SYMBOL settings level appears.
Figure 105: SYMBOL settings level
2. Run your finger along the touchring until the desired icon appears.
3. Select NEXT .
= On/off key LED illuminates.
= NAME settings level appears.
= The next available position in the default building service name illuminates.
Figure 106:
NAME
settings level
4. Run your finger along the touchring until the desired letter or number for the desired position in the
name is illuminated.
5. Press the on/off key to accept the letter/number.
=
The letter or number is accepted.
=
The next position illuminates.
6. To move to a particular position in the name, select < POS or POS > .
=
The corresponding position illuminates.
7. Repeat steps 4 and 5 until the name has been completely entered.
8. Select NEXT .
=
NUMBER settings level appears.