ZUM Radio ZUMspot-USB, Quick Start Manual, Page: 38 / 40

Ethernet:
●
Plug in the ZUMspot USB, to one of the USB ports on the Raspberry Pi.
●
Connect an Ethernet cable to the Raspberry Pi and then turn on the power.
●
After 3 minutes, go to your web browser (Chrome, Firefox, etc.) and connect to the website:
http://pi-star (for Windows, Linux and Android devices
http://pi-star.local (for OS X and iOS devices)
●
You should see this page.
●
Go to “ Configuration”
○ You will be asked to put in the default username which is “ pi-star” and the default
password which is “ raspberry ”
Configuration:
●
Change the Node Callsign to your own, set the “ Radio/Modem Type ” to “ ZumSpot - USB Stick ”,
set the “ System Time Zone ” to your timezone, and set the “ Dashboard Language ” to the
language you prefer.
●
Click “ Apply Changes” when you are done
●
When everything reloads, you will need to re-set the “ Radio/Modem Type” to “ ZumSpot -
Raspberry Pi Hat (GPIO)” and click “ Apply Changes” again.