Zultys ZIP4x4, User Manual

Page: 87 / 194

8. Using the Phone
77
8.2.6.3 Character Mapping on Numeric Keys
This is a list of the characters selected by repeatedly pressing the various keys:
1. ~, -, _, !, 1
2. a, b, c, 2; or A, B, C, 2
3. d, e, f, 3; or D, E, F, 3
4. g, h, i, 4; or G, H, I, 4
5. j, k, l, 5; or J, K, L, 5
6. m, n, o, 6; or M, N, O, 6
7. p, q, r, s, 7; or P, Q, R, S, 7
8. t, u, v, 8; or T, U, V, 8
9. w, x, y, z, 9; or W, X, Y, Z, 9
0. @, space, 0
*. * then selection
8.2.6.4 Using the * Key
When you press the * key, the ZIP4x4 selects the * which can be sent as a part of a dialled number,
either by SIP or as a DTMF digit. If you press the * key twice within 800 ms, you can select from
many different symbols. The phone changes the display to:
The cursor is at the dot character. Use the left and right arrows on the volume key or the Up and
Down buttons to move the cursor. Press the Esc button to exit this mode. When the cursor is
highlighting the character you want to select press any other key. The phone places the character
you selected in place of the * that it originally displayed.
1
You can enter a dot (period or full stop) quickly by pressing the * key three times.
8.2.6.5 Exiting Alphanumeric mode
You can put the phone out of the alphanumeric mode by pressing Func at any time. This will
allow you to easily enter digits that may be part of the address. You can return the phone to
alphanumeric mode by pressing the Func key again.
Select character:
.,:;-_#*()
'"
@&%/\<>~
+
÷=±µ°
?
!§
$
€¥
1. You cannot use some of these characters as part of an address. The SIP address is formulated based on the same rules
as an email address.