RECOMMENDATION FOR THE INSTALLATION
OF
1
RECOMMENDATION FOR THE INSTALLATION
FEATURE
is designed for outdoor use. It powered by 12VDC, and has a built-in backup battery, The siren communicates
with the alarm panel to realize its multifunction, contains a high power horn and a flashing light with a colored lens
Model
Siren Tone
Flash
Multifunction Led
Battery
Piezoelectric
Dynamic
Water
Level
Power
supply
3
yes
yes
12vdc/
1,3ah
-
yes
yes
12vdc
Model
SPL
Static
Current
Working
Current
Dimension
Weight
Resonant
Frequency
Tamper
Switch
118db
3mA
1,4A
280x170x97mm
1,2 Kg
0,5-3KHz
N.C.
CONNECTION
To optimize the sirens yield, the length of the wiring should be not over 15 meters
Picture 1:
Under the condition that without
battery, the terminal block of 12v
connect with the host 12v “+
-”power supply which with the
trigger , the ending resistor 820 ohm
connect with the 12v “+” and
“TRIG” of the alarm ,it is going to
trigger the siren to work , the power
supply of the host connect with the
host . Only under this condition, the
siren can be triggered.
ZDSH-108
ZDSH-108
ZDSH-108
ZDSH-108
