Main Document Only.
Manual of 03/05/2021 Rev. 1.1 “User Manual EV CHARGER 3PH 22kW”
8/62
1.
Preliminary safety instructions
If you have problems or questions in reading and understanding the
following information, please contact Zucchetti Centro Sistemi S.p.A.
through the appropriate channels.
Note
1.1.
Safety instructions
Highlights the safety instructions to be followed during installation and use of the equipment.
Before installing and using the equipment, make sure you read and understand the instructions in
this manual and familiarise yourself with the relative safety symbols shown in this chapter.
According to national and local requirements, permission must be obtained from your local
provider before connecting to the electrical grid, making sure that the connections are carried out
by a qualified electrician. All installation work must be carried out by a qualified and competent
electrician.
Contact the nearest authorised service centre for any repairs or maintenance. Contact your
distributor for information on the nearest authorised service centre. DO NOT carry out repairs
yourself, as this may result in injury or damage.
Qualified personnel
Ensure that the operator has the necessary skills and training to operate the equipment. Personnel
responsible for use and maintenance of the equipment must be qualified and capable of performing
the activities described, and must also have appropriate knowledge on how to correctly interpret
the contents of this manual. For safety reasons, this charging station can only be installed and
serviced by a qualified electrician with the necessary training and/or skills and knowledge.
Zucchetti Centro Sistemi S.p.A. declines all responsibility for damage to property or personal injury
caused by incorrect use of the device.
Do not attempt in any way to repair or replace components of the charging station without the
assistance of qualified personnel.
Installation requirements
Install and start the charging station according to the following instructions. Place the charging
station on suitable load-bearing supports with sufficient load capacity (such as metal walls or
columns) and make sure it is positioned vertically. Choose a suitable location for the installation of
the electrical equipment. Make sure there is sufficient space for heat dispersion and to
accommodate future maintenance. Maintain adequate ventilation and ensure that there is enough
air circulation for cooling.
Summary of Contents for AZZURRO ZCS
Page 1: ...EV CHARGER 3PH 22KW ...
Page 64: ......
