ZG1163 CO
2
and Temperature Monitor Operating Instructions
Product Overview
Thank you for selecting ZG1163 desktop CO
2
monitor, ZG1163 CO
2
monitor is smart, compact and easy-to-use. In addition to measuring the
CO
2
concentration, ZG1163 can also measure the ambient temperature. This product is developed to detect the presence of CO
2
monitor in
ambient air and help people to take care of Indoor Air Quality. ZG1163 can be widely used in the office building, school, exhibition, shopping
mall, meeting room, fitness center, restaurant and other pubic place where personal comfort, healthy is important.
Features:
□
V
The built-in Data logger can store 48 sets of CO
2
and temperature in the past 24 hours; one log per 30 minutes.
□
V
Max/Min mode can record the maximum and minimum concentration of CO
2
since the device has been last turned on.
□
V
The Alarm mode the Alarm Level can be adjustable by user.
□
V
The RCFS Mode can recover the original factory settings after the CO
2
device has been recalibrated, altered, or damaged.
Mode Functions
There are several Modes which can be adjusted by user. These modes are ALTI Mode, ALARM Mode, OUTSIDE Mode, CALI Mode,
DATALOGGER Mode, MaxMin Mode and rcFS Mode in sequence.
The beep alarm can be can be turned on/off by user.
ALTI
Compensate the pressure changes with appropriate altitude of location when measure.
ALARM 1
Alarm while CO
2
concentration exceed one threshold, alarm level can be adjusted by user
the Alarm sound can be turn on/off while the “speaker Icon” flash.
OUTSIDE
Modify the outside CO
2
concentration for calculating the ventilation rate.
CALI
Calibrate the sensor while the reading deviates from the actual CO
2
concentration.
DATALOGGER Show the past CO
2
and Temperature records in the past 24 hours.
MaxMin
Show the Max and Min CO
2
reading before being cleared or after PowerOn.
rcFS
Recover the factory setting to cancel customize setting.
1.Enter Button
6.Green LED Display (<800ppm)
2. Down Button
7. Yellow LED Display (800-1200ppm)
3. Up Button
8. Red LED Display (>1200ppm)
4. Mode Button
9.Gas Entry Hole
5. LCD display
10. Power inlet
11. RJ45 socket (only for factory use)
(Display Features and Modes)
