Hardware Development Guide of Module Product
44
All Rights reserved, No Spreading abroad without Permission of ZTEWelink
Figure 7-2 Interface of Main Antenna and AGPS Antenna Welding Pad
Figure 7-3 RF Interface Testing Console (W.FL-R-SMT-1 from HRS)
If the main antenna is access by the RF connector, the corresponding cables of RF
interface are recommended to use the W.FL-LP-04N of HRS company, as shown in
Figure 7-4. When this connection mode is adopted, the antenna RF connector can
be directly inserted to the RF testing console of the module, so it saves the
connection between the RF port and the antenna interface.
