ZXV10 ET312 User Guide
Parameter
Description
Auxiliary video
grab
Whether to allow other terminals to take away the presentation token in
the H.323 conference.
l
Accept
: Other terminals can take away the presentation token when
the local terminal is sending a presentation video, that is to say, when
other terminals send a presentation video, the local terminal stops its
presentation video, and allow other terminals to send its presentation
video.
l
Reject
: when the local terminal is sending a presentation video, other
terminals cannot send a presentation video.
Mute on meeting
Whether a terminal automatically mutes a local microphone when joining a
conference.
4.
Press the
Back
key on the remote control to save your configuration.
4.2.2 Setting the Video Source
This procedure describes how to configure the video source in accordance with the
connection between the video input interface of the terminal and the peripheral.
In most cases, the default settings are used. If the interface to which the video source is
connected is changed, the settings need to be changed.
Prerequisite
The terminal is not engaged in a conference.
Steps
1.
Select
> Media > Video
, the
Video
setting window is displayed.
2.
Select the desired video source from the drop-down list. It is recommended that you
select
USB Camera
as the primary video source.
If
USB Camera
is selected, the terminal automatically determines whether to use the
USB 2.0 or USB 3.0 interface. The USB 3.0 interface is recommended.
3.
Press the
Back
key on the remote control to save your configuration.
4.2.3 Setting QoS
The Quality of Service (
) setting refers to the mode in which the network processes
IP packets are transferred during a video conference. In an IP network with restricted
resources, the terminal can automatically adapt to packet loss, jitter, and delay in the
network to ensure video and audio transmission quality.
4-18
SJ-20190419092037-001|2019-04-08 (R1.0)
ZTE Proprietary and Confidential