ZXSDR BS8802 C100 User Guide
Figure 6-24 Design Template for Marking Holes
3.
Insert the expansion bolts, and hammer them to fix properly.
4.
Install the GPS antenna rack to the corresponding bolt position.
5.
Insert a spring washer and flat washer onto expansion bolts and use the M6 nut to fix
the rack on the wall firmly.
Note:
The torque used to fix the clamp is 45 Nm.
6.
Fix the GPS antenna to the GPS settled clamp and screw the M4x14 bolt tightly.
– End of Steps –
Result
shows the GPS antenna fixed on the wall.
6-24
SJ-20110329145303-001|2011–10–25 (R1.1)
ZTE Proprietary and Confidential
