Chapter 5 Management Configuration
The following example sets the data source of the history group whose index is 10 to userx:
zte(cfg-snmp)#set history 10 datasource userx
The following example sets the buckerRequest of the history group whose index is 10 to
100:
zte(cfg-snmp)#set history 10 bucketRequest 100
The following example sets the owner name of the history group whose index is 10 to tom:
zte(cfg-snmp)#set event 10 owner tom
The following example sets the time interval of the history group whose index is 10 to 100
seconds:
zte(cfg-snmp)#set history 10 interval 100
The following example sets the status of the history group whose index is 10 to invalid:
zte(cfg-snmp)#set history 10 status invalid
5.5.6 show rmon
Purpose
This command shows the RMON global configuration.
Command Mode
All configuration modes
Syntax
show rmon
Example
zte(cfg-snmp)#show rmon
Rmon is enabled.
5.5.7 show statistics
Purpose
This command shows the configuration of a statistics group or all statistics groups.
Command Mode
All configuration modes
5-35
SJ-20131111172707-003|2013-11-27 (R1.0)
ZTE Proprietary and Confidential
