ZXR10 5250 Series Command Reference
In user mode, you can run the
exit
command to exit the switch configuration or run the
show
command to view the information about system configuration and operation.
Note:
The
show
command can be run in any mode.
2.1.2 Global Configuration Mode
In user mode, you can run the
enable
command and enter the corresponding password to
enter global configuration mode, which is shown as follows:
zte>enable
Password:***
zte(cfg)#
In global configuration mode, you can configure various functions of the switch. The
password for entering global configuration mode must be set by running the
set user
local
<
name
>
admin-password
[<
string
>] command to prevent login of unauthorized users.
To return to user mode from global configuration mode, run the
exit
command.
2.1.3 SNMP Configuration Mode
In global configuration mode, you can run the
config snmp
command to enter SNMP
configuration mode, which is shown as follows:
zte(cfg)#config snmp
zte(cfg-snmp)#
In SNMP configuration mode, you can set the SNMP and RMON parameters.
To return to global configuration mode from SNMP configuration mode, run the
exit
command or press
Ctrl-Z
.
2.1.4 Layer-3 Configuration Mode
In global configuration mode, you can run the
config router
command to enter layer-3
configuration mode, which is shown as follows:
zte(cfg)#config router
zte(cfg-router)#
In layer-3 configuration mode, you can configure the layer-3 port, static router, and ARP
entity.
To return to global configuration mode from layer-3 configuration mode, run the
exit
command or press
Ctrl-Z
.
2-2
SJ-20131111172707-003|2013-11-27 (R1.0)
ZTE Proprietary and Confidential
