Zte ZXR10 5250 Series, Command Reference Manual

Page: 376 / 708

ZXR10 5250 Series Command Reference
Syntax
set qos traffic-limit port
< 1-28 > percent < 1-100 >
Parameter Description
Parameter Description
< 1-28 >
Port number. The range varies with the device type. Use the
5250–28TC as an example.
< 1-100 > Percent.
Example
The following example sets the percent of the ingress rate limit to the physical bandwidth
to 50 for port 2:
zte(cfg)#set qos traffic-limit port 2 percent 50
4.14.22 set qos traffic-limit port protect
Purpose
This command sets port protection. When the traffic on the port exceeds the rate limit, the
port is shut down and becomes unavailable for a specified period.
Command Mode
Global configuration mode
Syntax
set qos traffic-limit port
<
1-28
>
protect
{
enable
|
disable
| time <
1-10
>}
Parameter Description
Parameter Description
<
1-28
>
Port number. The range varies with the device type. Use the
5250–28TC as an example.
enable
Enables the port protection function.
disable Disables the port protection function.
time Shuts down the port.
< 1-10 > Duration when the port is unavailable, unit: minutes.
Guidelines
This command is mutually exclusive with the set qos traffic-limit port trap command.
4-318
SJ-20131111172707-003|2013-11-27 (R1.0) ZTE Proprietary and Confidential