ZXR10 5250 Series Command Reference
Syntax
show vlan voice-vlan
<
vlanlist
>
qos
Parameter Description
Parameter
Description
<
vlanlist
>
ID list of voice VLANs
4.7 MAC Table Operation
4.7.1 set port security
Purpose
This command enables or disables the port security function.
Command Mode
Global configuration mode
Command Mode
set port
<
portlist
>
security
{
enable
|
disable
}
Parameter Description
Parameter
Description
<
portlist
>
Port list.
enable
Enables the port security function.
disable
Disables the port security function.
Guidelines
If the port security function is enabled, the port MAC learning function is disabled and
unknown-source MAC messages are not forwarded. The port security function can work
with the authentication function to enable the access service.
Default
The port security function is disabled.
Example
The following example enables the security function of ports 1, 5, 6, 7 and 11:
zte(cfg)#set port 1,5-7,11 security enable
4-92
SJ-20131111172707-003|2013-11-27 (R1.0)
ZTE Proprietary and Confidential
