Chapter 4 Service Configuration
Parameter
Description
high
High priority
low
Low priority
Guidelines
Priorities include critical, high, and low (from high to low). If port priorities are the same,
the port with the smallest port number has the highest priority. The total power of the ports
whose priority is critical cannot exceed the total power of the device.
Default
The low priority is selected.
Example
The following example sets the priority of ports 1, 3 and 5 to critical:
zte(cfg)#set poe port 1/1,1/3,1/5 priority critical
4.3.4 set poe port forcepower
Purpose
This command enables or disables the forced power-on function for ports.
Command Mode
Global configuration mode
Syntax
set poe port
<
portlist
>
forcepower
{
enable
|
disable
}
Parameter Description
Parameter
Description
<
portlist
>
Port list.
enable
Enables the forced power-on function.
disable
Disables the forced power-on function
Guidelines
When the forced power-on function is enabled for a port, unless short circuit is detected,
the device will ignore PD detection and provide power supply for the port directly. Too
many forced power-on ports will occupy power resources of the ports whose priority is
critical, which causes abnormal operation.
4-65
SJ-20131111172707-003|2013-11-27 (R1.0)
ZTE Proprietary and Confidential
