Zte ZXR10 2900E Series, Command Reference Manual, Page: 547 / 750

Chapter 4 Service Configuration
Parameter Description
Parameter Description
< portlist > Port list.
enable Enables the OAM function on the specified ports.
disable Disables the OAM function on the specified ports.
Guidelines
The specified ports automatically initiate link discovery processes if the OAM function is
enabled globally and enabled on these ports.
Default
The OAM function is disabled on ports.
Example
The following example enables the OAM function on port 1:
zte(cfg)#set ethernet-oam port 1 enable
4.30.3 set ethernet-oam port period timeout mode
Purpose
This command sets the OAM discovery period, timeout duration, and mode on the specified
ports.
Command Mode
Global configuration mode
Syntax
set ethernet-oam port
< portlist > period < 1-10 > timeout < 2-20 >
mode
{
active
|
passive
}
Parameter Description
Parameter Description
< portlist
> Port list.
< 1-10
>
Sending period of oampdu messages, unit: 100 milliseconds,
default: 10.
< 2-20
>
Timeout duration when the link is established, unit: seconds,
default: 5.
active
Active discovery mode.
passive
Passive discovery mode.
4-487
SJ-20130731155059-003|2013-11-27 (R1.0) ZTE Proprietary and Confidential