ZXBIV IPTV MDP Operation Manual
F
IGURE
27 C
HECKING
POP U
NIT
D
ETAILED
I
NFORMATION
E
ND OF STEPS
Adding POP Unit
Steps
1. Click
System Resource > POP Unit
.
2. Click the
add
button.
Note:
The POP unit type is defined in the
Node type
in the
Add
node
page by clicking
add
in the
Node management
page
(this page is opened by clicking
System Resource > Node
) .
�
If it is a CDN node, the Web page shown below appears.
F
IGURE
28 A
DDING
POP U
NIT
The CDN POP unit parameters are described in the following
table.
T
ABLE
6 P
ARAMETERS OF
CDN POP U
NIT
Parameter
Description
Remark
Node name
Select the node name
corresponding to the
POP unit FTP.
Select the node from the drop-down list
Note: The node must have already be created.
Otherwise, no options in the drop-down list.
POP unit type
POP unit type.
CDN POP unit.
POP unit name
Input the POP unit
name.
The name should not contain “'”.
For example: unit058223240057.
POP unit
storage space
(MB)
The upper space limit
for the shared disk
array.
Input the space size according to the actual
application.
Maximum: 999999999 M.
24
Confidential and Proprietary Information of ZTE CORPORATION
