Confidential and Proprietary Information of ZTE CORPORATION 10
C h a p t e r
2
Entering Text
Changing Input Mode
You can enter text into your phone using the following input methods: ZiAbc, abc, Abc, ABC, and
number input. You can also switch the language between English and Spanish.
Current Text Mode
When you are in a field that allows characters to be entered, the text input mode indicator is shown in the
upper right corner of the display.
Changing Input Mode or Language
Press the
# Key
and select an input method or language.
Using Predicative Text (ZiAbc)
The predictive text method is based on a built-in dictionary and generates words from the combination of
letters pressed.
1. Press each key once that corresponds to the letter you want to enter. The letters are shown on the
display as they are entered. The list of candidate words changes as each key is pressed.
2.
When the candidate words are displayed, use the
Navigation Key
to highlight a candidate word and
then press the
OK Key
to
Select
.
3. Press the 0 Key to insert a space, or press the * Key to select symbols.
4. Press the
Clear Key
to delete the letter to the left of the cursor. Hold the
Clear Key
to delete all
entered text to the left of the cursor.
Entering Letters
Press a number key (2-9) multiple times until the preferred letter is shown on the screen. Press once to
enter the first letter on the keypad, press twice quickly to enter the second letter, and so on.
Press the
0 Key
to add a space.
Press the
0 Key
twice quickly or hold the 0 Key to enter 0.
Notes:
•
When using “Abc” mode, only the first letter will be capitalized.
•
After entering the first capital letter, the input mode will be changed to “abc” automatically.
Entering Numbers
Press the
# Key
and select 123. The input method icon ( ) is shown on the display. You can enter numbers
directly using the number keys.
Tip:
•
When using the number input, you need to switch to other text input methods if you want to input a
space by pressing the
OK Key
.
Entering Symbols
1. Press the
* Key
.
2. Use the
Navigation Key
to select a symbol.
