GETTING TO KNOW YOUR MOBILE HOTSPOT
Charging & USB port
LCD screen
ON/OFF switch
WPS key
micro-SIM card slot
Part
Description
Micro-SIM
card slot
Install the micro-SIM card.
WPS key
Double-press to show SNTP time, SSID, Wi-Fi
password and software version on the LCD screen.
Double-press again to exit.
When the Wi-Fi function is enabled, hold it for less
than 3 seconds to disable the Wi-Fi function.
When the Wi-Fi function is enabled, hold i
t
for more
than 3 seconds to active
the
WPS function.
When the Wi-Fi function is disabled, hold it for more
than 3 seconds to enable the Wi-Fi function only.
ON/OFF
switch
Slide it to turn on/off the HotSpot.
LCD
Screen
It shows the signal type, signal strength, battery, Wi-Fi,
etc.
Charging/
USB port
Charge your device.
Connect the client to your device via USB cable.
Reset point
Insert a pin and hold it
for 3 seconds to reset
your device.
Coverage
not available in some areas. Please see coverage details
at T-Mobile.com. Device and screen images are simulated. Capable
device is required to achieve 4G speed.
INDICATORS
Indicates that your
Mobile HotSpot is
on T-Mobile’s 2G
network.
Indicates how
many devices are
connected to the
Mobile HotSpot.
Indicates that your
Mobile HotSpot is
on T-Mobile’s 3G
network.
Indicates that the
Wi-Fi function is
disabled.
Indicates that your
Mobile HotSpot is
on T-Mobile’s 4G
network.
New text message
in your message
Inbox.
There is no signal.
There is no battery
installed.
Indicates that your
device is connected
to the Internet.
Indicates that the
battery power is low.
Indicates that
your device is
disconnected from
the Internet.
Indicates that the
battery power is full.
SET UP YOUR MOBILE HOTSPOT
1. Lift SIM cover and Install SIM card.
2. Power on.
Slide to turn on
Charge your Mobile HotSpot
You can charge your Mobile HotSpot using the charger included in
the box or by plugging it into your computer using the USB cable.
CONNECT & GO
Connect your Wi-Fi device to your Mobile HotSpot
1. Power on your Mobile HotSpot.
2. On your computer or other Wi-Fi enabled device, search for
available Wi-Fi Networks and select the default Network Name
(SSID) for your Mobile HotSpot.
3. Enter the default password and click
OK
.
Note:
It may take up to a minute to establish a connection.
Then the default Network Name (SSID) and password will
appear in the screen on your Mobile HotSpot or lift off the
battery cover to find your default Network Name (SSID) and
password
