18
Use one of these methods to turn the projector on or off:
When the Spro2
‟s screen is turned on, swipe up or down
using THREE fingers on the screen to turn on or off the
projector.
Drag the status bar down from the top of the screen and
touch
Projector
on the top of the notification panel.
From the
HOME
tab of the home screen, touch the round
button on the
Projector
widget.
From the
SETTINGS
tab of the home screen, touch
Projector > Control
and then touch the switch next to
Projector
in the
Projector settings
screen.
NOTE:
For best results, project onto a non-reflective white
flat display surface at a 90° angle to Spro2
‟s touch screen.
The projection distance of Spro2 is about 3 to 12 feet.
Adjusting the Projection
When the projector is on, you can adjust projection focus,
keystone distortion, projection brightness, and projection color.
To adjust projection focus:
1. Touch
Home > SETTINGS > Projector > Image
.
2. In the Focus section, t
urn on automatic focus or touch “+” and
“-” to make manual adjustment.
NOTE:
P
ress the
Power
button
twice quickly to adjust projection
focus automatically.
