19
There are several ways that you can turn on or off the projector.
When your Spro 2‟s screen is turned on, swipe up or down
using THREE fingers on the screen to turn on or off the
projector.
Drag the status bar down from the top of the screen and
touch
Projector
below
Control Switch
.
From the
HOME
tab of the home screen, touch the round
button on the
Projector
widget.
From the
SETTINGS
tab of the home screen, touch
Projector > Control
and then touch the switch next to
Projector
in the
Projector settings
screen.
Press and hold the
Power
key and touch
Turn on projector
or
Turn off projector
.
If the projector floating button is enabled, touch
to open
the options menu and touch
(
Projector off
) or
(
Projector on
).
NOTE:
For best results, project onto a non-reflective white flat display
surface at a 90° angle to Spro 2
‟s touch screen. The projection
distance of Spro 2 is about 2.3 to 12 feet.
Adjusting the Projection
When the projector is on, you can adjust projection focus,
keystone distortion, projection brightness and projection color.
To adjust projection focus:
