17
Powering On/Off Your Spro 2
Ensure that the battery is charged.
Press and hold the
Power
key
to turn on your Spro 2.
To power it off, press and hold the
Power
key
to open the
options menu. Touch
Power off
and then touch
OK
.
Restarting Your Spro 2
If the screen freezes or takes too long to respond, try pressing
and holding the
Power
key
for about 10 seconds to restart Spro
2.
Waking Up Your Spro 2
Your Spro 2 automatically goes into sleep mode when it is not in
use for some time. The touch screen is turned off to save power
and the keys are locked to prevent accidental operations.
You can wake up your Spro 2 by following the instruction as
below.
1. Press the
Power
key
to turn the touch screen on.
2. Touch and hold any area of the screen to unlock Spro 2.
NOTE:
If you have set an unlock pattern, a PIN or a password for your
Spro 2 (see
Protecting Your Spro 2 With Screen Locks
)
, you‟ll
need to draw the pattern, or enter the PIN/password to unlock
your Spro 2.
