21
3 Voice Calls
3.1 Making a call
(1)
Before making a call, make sure:
a) The PWR or BATT light is on
b) The RSSI light is on;
c) The Telephone cable (RJ11) is connected properly;
d) The PHONE light is on when you pick up the call.
(2)
Pick up the handset of the telephone which has been
connected to the modem shown in installation
process;
(3)
Key in the telephone number;
(4)
You can either press the “#” key on the telephone to
send the call, or wait 4 - 8 seconds for the call to be
connected automatically;
(5)
Call will be connected.
If you are making a domestic call, key in the phone
number like this:
Trunk or Mobile Code + Phone Number
e.g. 03-XXXXXXXX or 04XX-XXXXXX
