10
(2)
DIAG
: Test and diagnostic interface;
(3)
PHONE
: For connection to a telephone set via the
telephone cable (RJ11);
(4)
LAN
: For connection to a computer via the Ethernet
cable provided (Cross- RJ45);
(5)
Power Socket
: For connection to the external power
supply;
(6) : Power switch to turn the modem “On” or “Off”.
2.3.2 Installation
1. Step 1: Install the antenna provided, to the antenna
connector.
Hold the antenna and rotate the screw cap in clockwise
direction.
Do not rotate the antenna directly.
Chart 2-5 Antenna installation
Note: Please make sure you DO NOT put anything on top
of the modem or antenna.
Antenna
Screw cap
