Before Using the Terminal
32
Flick
Touch the screen and sweep the finger quickly.
Switching portrait/landscape view
You can switch the display view by tilting the terminal lengthwise or
sideways.
1
From the Home screen,
→
[Settings]
→
[Display]
→
[When device is rotated]
2
[Rotate the contents of the screen]/[Stay in
portrait view]
◆
Information
・
Even when you change the orientation of the terminal, the screen
may not change depending on the screen displayed.
・
The screen view cannot be switched by changing the orientation
when the terminal is almost level against the ground.
・
You can make the setting from the quick setting panel.
→
Screenshot
You can save a screen displayed on the terminal as an image.
・
Some screens may not be saved.
1
Quickly press the function key twice
・
In Dual Mode, tap "Save this screen" appeared at the bottom
of each screen to save the tapped screen only.
・
Screenshot images are saved in png format. They can be
viewed with "Gallery" or "Photos" application.
Emergency mode
In case of emergency such as disaster, reduce the battery
consumption by restricting the screen brightness or turning off
functions.
1
Press and hold
O
(1 sec. or more)
2
[Emergency mode]
→
[OK]
The terminal restarts and Emergency mode is set.
・
To cancel the setting, perform the same operations again or
from the Home screen in Emergency mode, tap [Emergency
mode]
→
[OK].
◆
Information
・
Alternatively, from the Home screen,
→
[Disaster kit]
→
→
Tap
[OK] to set Emergency mode.