manualshive.com logo in svg

Zte H3140, Maintenance Management Manual, Page: 36 / 97

Share
Download
Zte H3140 Maintenance Management Manual Download Page 36

H3140 Maintenance Management Guide

Parameter

Description

If the ingress is a WAN or 3G connection, the egress
should be the LAN. The data traffic direction is down-
stream.

Egress

Specify the data traffic direction. The Ingress option and
egress option cannot be the same.

If the ingress is LAN, the egress should be a WAN or 3G
connection. The data traffic direction is upstream.

If the ingress is a WAN or 3G connection, the egress
should be the LAN. The data traffic direction is down-
stream.

DSCP

A DSCP is specified for the TOS byte in the IP header of each
packet to indicate the priority. Range: 0–63.

10.Click 

Apply

 button to apply the changes.

4.4.3 Configure the Local Service Control

Abstract

The procedure describes how to configure local service control, including local service
control-IPv4 and local service control-IPv6.

Steps

Configure the Service Control-IPv4

1. On the main page of the H3140, select 

Internet > Security > Local Service Control

to the 

Local Service Control

 page.

2. Click 

Service Control-IPv4

 to open 

Service Control-IPv4

 page and then click the 

Create New Item

, see 

Figure 4-15

.

30

SJ-20210621164956-009 | 2021-12-07(R1.0)

Summary of Contents for H3140


































































































Reviews:

No comments